HOW TO USE THE ELECTRONIC PULSE MASSAGER iPRO MASSAGER

How To Use Eliking Electronic Pulse Massager iPro Massager III & iPro Massager IV Step By Step:

1. Take The iPro Massager out of the box

2. Connect the white pulse wires to the iPro Massager

3. Make sure both wires are connected to the iPro Massager device

4. Connect the pulse wires to the desired pads (smaller or larger)

5. Remove film from pads

6. Attach pads to target area directly on skin, sticky side should attach to the body

7.  Turn on iPro Massager

8. Choose and modify the modes and volume you desire.

(Click image to enlarge)

9. When Done, turn off the device and make sure to put the film back on the pad for maximum lifespan

10. You can wrap the wires around the wire-wrapper

11. To charge the iPro Massager battery, connect the USB cable to the device

12. Then connect the USB to a computer

or to the outlet device, and then to the wall

How to use iPro Massager Abdominal Belt:

1. Connect the wire to the iPro Massager Device

2. Then connect the wire to the Abdominal Belt

3. Attach the Velcro strap

4. And tie around your waist

Turn the iPro Massager on

And select mode and strength

How to use iPro Massager Massage Shoes

1. Connect the wires to the iPro Massager III device

2. Connect the wires to the shoes

3. Place you foot in the shoe and adjust Velcro for perfect fit

4. Turn on the iPro Massager device

5. Select the mode and strength you desire